Click image to view full size image
Description:
1. Powerful and convenient.2. Widely uesed in farming, building industry and garden
architecture.
1. Fill tank with unleaded 4stroked petrol.
2. Set the machine on firm level ground and check fuel & oillevels.
3. To start the engine set the chocke by pushing thethrottle lever fully forward, 2 or 3 pulls and the engine willstart.
4. Move the throttle lever, backward slightlyto disengage thechock and set the engine speed to fast, allow the engine towarm.
To Move Forward
1. Select require speed with gear change lever. Hold down theBreak handle. Gently engage clutch lever.
2. Control engine speed with throttle.
To Reverse
Stop the power barrow, move gear change lever to positionreverse, check behind for obstacles, and then gently engageclutch.
Stop
Release the clutch lever, Dis-engage Break handle, reduce enginespeed with throttle lever.
To Empty Skip
1. Stop the machine and disengage the skip release lever
2. Jerk both handle upwards, the skip will pivot forward anddump the load with gravity force.
To Reset Skip
Pull back the skip and engage the locking catch which holds theskip closed.
NOTICE
Check that the locking catch has engaged before moving off
DIMENSIONS
MODEL | SPECIFICATIONS | |
PL250-1 With Honda GXV Engine | Engine | Honda GXV160 4-stroke 5.5HP |
Transmission | Peerless transaxle 4X forward/ 1 x reverse speed | |
Forward speed | 0.8-5.6kph | |
Noise rating | Less than 80db | |
Capacity | 250-300kgs 6 cu ft | |
Hand Brake | Disk on transmission | |
Weight | 92kgs/202lbs unloaded weight | |
PICTURE
power barrow
